ASI-V
Enhanced features and convenience with easier operation
Enhanced features and convenience with easier operation
Combining the ASI-V automatic sample injector with a TOC-V Series analyzer (except TOC-VE) creates a fully automatic analysis system.
Features:
- Four sample vial capacities are available. Select the sample vial and sample rack to suit the analyzed sample.
* 93 x 9mL, * 93 x 24mL, * 68 x 40mL, * 24 x 125mL - All three vial types have a well sealed septum that can be easily replaced with the screw cap.
- The sampling needle is optimized for sample extraction from highly-sealed vials and for sparging.
- Changing analysis conditions or adding sample vials during analysis is simple. System operation and carrier gas flow can be automatically stopped on completion of measurements.
- Creating multiple calibration curves and selecting the optimal curve for samples with significantly differing concentrations allows these samples to be analyzed in a single run.
- Rinsing both external and internal surfaces of the sampling needle prevents carryover between samples.
Specifications:
| Vial types: | Select from three types: 24mL, 40mL, 125mL Number of vials:24mL: 93 40mL: 68 125mL: 24 |
| Vial Septum: | with dedicated septum |
| Sample sparging: | OK (If the external sparging kit is used) |
| Dimensions: | (W)370 x (D)540 x (H)490mm (exclusing protrusions) |
| Weight: | approx. 14 kg |
