Test & Measure

Home > Products > Test & Measure > Universal Testing > EZ-Graph

For customers who want to carry out high-speed tests on electronic components, high-precision tests using rigid equipment and atmospheric control using thermostatic chambers. A PC is needed for these tests.

High Quality Test Data
High-speed data sampling to achieve the true values. Ultra high-speed sampling at 1.25m/sec intervals The ultra high-speed sampling at 1.25msec intervals (for 25 seconds) allows highly accurate measurement of the test force in the elastic and break regions to detect any changes in the materials during the test. This function is particularly effective for ceramics and highly rigid new materials. The speed of the ultrahigh-speed sampling can be selected from 1.25m/sec to 5m/sec. The normal sampling (outside the ultra high-speed sampling range) is also very fast at 10m/sec.

With normal sampling, it is also possible to set the sampling intervals by test force and displacement, which are effective for the relaxation and the creep tests.

The time can be set in 50m/sec intervals as 50m/sec, 100m/sec, 150m/sec. The test force and displacement intervals can be set using any user-defined values, such as at 1N intervals and at 0.1 mm intervals.

A wide range of test speeds allows for testing of various materials.
A wide range of speed control thanks to the servo-motor The ultra-low-speed type provides a wide crosshead speed range of 0.00005 to 1000mm/min. The crosshead speed range of the standard type is 0.0005 to 1000mm/min. Tests are possible up to the maximum capacity for the entire speed range.

Smart Controller
By using the Smart Controller, basic operations such as starting and stopping the machine, as well as other operations such as fine adjustments of the jig position when setting the specimen and opening and closing of the pneumatic grips, can be easily conducted at hand.

1. Test force and elongation display
   This is a function that is necessary for safety checks. These forces and elongation can be easily checked at the display in your hands when setting the specimen, checking the initial test forces, checking the position of the crosshead, and setting micro test forces.
2. Testing Machine Monitor (Not Shown)
   Testing machine monitor (PC Display) It's is also possible to check the operation conditions and speed on the PC monitor.
3. Return Switch
   The crosshead is restored to its original position. When the switch is pressed, the direction of the crosshead movement is displayed to prevent errors.
4. Color Indication, Flashing Lights
   Color indications and flashing lights to show the testing machine operations. The current state of the testing machine and the subsequent operations are displayed by colours and lights for instantaneous safety checks.
5. Manual Dial
   The crosshead movies up and down in response to turns of the dial. The intuitive operations helps minute adjustments required when replacing the jigs, mounting micro specimens, and applying the initial test force before starting the test.
6. Crosshead operations switch
   A highly durable mold type switch is used for the operation of the crosshead, which is carried out of frequently.
7. Options operations switches
   The opening and closing of the air chuck can be carried out.